Description
DIRECTIONS FOR USE:
Cleaning and Preventing Buildup: TS®AS&C outperforms diesel fuel for all of your continuous and end-of-day cleaning needs. Spray, dip, or rinse shovels, rakes, pavers, hoppers, tanks, pots, lutes, tampers, rollers, screeds, squeegees and even shoes. TS®AS&C works on all types of hot, warm, and cold mixes as well as tack and sealcoats.
Hardened Deposits and Crystallized Tack: TS®AS&C is excellent at breaking down the most difficult of asphalt cleaning needs. Problem areas can be soaked for minutes, hours, overnight or even weekends as TS®AS&C evaporates slowly and continues to work. For heavy deposits, re-wetting can be helpful as TS®AS&C can dilute as it soaks in deeply and run off along with the dissolved waste oils.
Usage as a Release Agent*: TS®AS&C is an excellent and long lasting pre-treat release for hand tools, hoppers, loaders, shuttle buggies, and truck beds. Apply a thin layer to your surfaces before filling and sticky asphalt products will slide right off. With its low evaporation rate and high flash point, a single application of TS®AS&C will prevent sticking for multiple usages. As with ANY product that melts and separates the binder from the aggregate, TS®AS&C is not AASHTO/NTPEP approved for usage as a release in every State’s DOT managed highway projects. Consult your State’s DOT regulations, your DOT highway contract, or write sales@staarlubricants.com for more information.
Worker Friendly and Machine Lubricating: TS®AS&C performs without harsh chemicals and odors and is even safe for contact/cleaning of skin. Whether used strictly as a lubricant or left residually after cleaning, TS®AS&C will lubricate and protect moving parts such as screws, bearings, sprockets, augers, and chains.
EPA Designated Environmentally Acceptable Lubricant: Trick Shot® AS&C complies with The Clean Water Act (CWA) through its designation as an Environmentally Acceptable Lubricant (EAL). Using TS®AS&C around the job or around the plant will not harm the environment and will pass regulator/governmental snap inspections or ongoing compliance checks.
USDA Certified Biobased and Renewable: Trick Shot® has been registered with the USDA at 96% biobased Carbon content. Before performance additives, TS®AS&C’s base oil is Soy Oil Plus which is created from US grown soybeans processed through a proprietary chemical conversion loosely related to making biodiesel.
Warnings: STAAR Lubricants recommends the usage of stainless steel for spray orifices, Nitrile for O-rings, and steel or thick-walled HDPE or PET plastics for containers. Write sales@staarlubricants.com for more information and recommendations.
CONTAINS: Soy Oil Plus
CAUTION: CONTENTS UNDER PRESSURE. Use only as directed. Never store at temperatures above 120°F (49°C). Use only as directed. Do not puncture, expose to heat, or incinerate container. KEEP OUT OF REACH OF CHILDREN. Do not allow to pool on painted areas for long periods of time. Performance may degrade at freezing temperatures.
FIRST AID: In case of eye contact, try flushing the affected area with clean water for 15 minutes, or better yet, seek medical attention immediately. In case of skin contact, wash the affected part of the skin with soap and water. If overcome by vapors, remove to fresh air. If swallowed, it is best to contact a physician immediately. Do not induce vomiting.